Pulsar 2.0
2 m span Sailplane.
Code 1.1
|
|
The three piece wing which is extremely light but very strong, is built with a carbon woven cloth D-box leading edge, with carbon capped ribs and a carbon trailing edge. This design is not afraid of heat and cold, is not afraid of moisture and rain. Wing and control surfaces are not subject to warping, as is usually the case with full balsa model counterparts. The fuselage has easily removable canopy for R/C equipment service. The fuselage can be equipped with a ballast chamber to fly in the mountains or tow hook for flight at the airfield. These options are set at the request of the customer. Ballast set for Pulsar 2.0 see here: Pulsar 2.0 Ballast set The ailerons, flaps, rudder and elevator are pre-hinged. |
|
|
Specifications:
Wing span 1990 mm Length 1230 mm Wing Area 32 sq. dm Airfoil AG 25 mod. Weight (less R/C gear) 320 g
Control: Ailerons, Rudder, Elevator, Flaps. |
Equipment Installation Diagram. Recommended Equipment: Receiver battery 4 x 600 Ah NiMh Servo 2 x 9 mm for elevator and rudder, 4 x 9 mm for ailerons and flaps. Recommended Control Travel: Elevator +/- 5 mm Rudder +/- 20 mm Flap Full down Ailerons +/- 8 mm Take off and landing +/- 3..4 mm Glide Use the template to set "0" flaps and ailerons. Tape down all removable parts before flying! GOOD LUCK!
Download template.
