Pulsar 2.5

 

 

 

F5J Electric Sailplane 2,5 m span.

Code 2.4

 

Download

The three piece wing which is extremely light but very strong, is built with a carbon woven cloth D-box leading edge, with carbon capped ribs and a carbon trailing edge.

This design is not afraid of heat and cold, is not afraid of moisture and rain. Wing and control surfaces are not subject to warping, as is usually the case with full balsa model counterparts.

Central panel is made with a cross "V" 2 degrees, which improves the performance models.

The fuselage has easily removable canopy for R/C equipment service. 

The ailerons, flap, rudder and elevator are pre-hinged.

 

Download

Specifications:

 

Wing span                     2490 mm

Length                          1200 mm

Wing Area                     39,5 sq. dm

Airfoil                           AG 25 mod.

Weight (less R/C gear)   390 g

 

Control: Ailerons, Rudder, Elevator, Flaps, Motor.

Equipment Installation Diagram.

 

 

Recommended Equipment:

 

Motor               Hacker B20-15L+4:1

Controller         Phoenix 25

Battery pack     3 LiPo 800-1000 mAh

Propeller          folding 10” x 7”

Servo              2 x 8 mm elevator and rudder,

                      4 x 9 mm flaps and ailerons.

Recommended Control Travel:

 

Ailerons            +10/-8 mm

Elevator            +/-8 mm

Rudder             +/-20 mm

Flap                  Full down

Use the template to set "0" flaps and ailerons.

Download template.




Assembling instruction: see here

 

Available Pulsar 2.5 with V-tail.

 

 

Available Pulsar 2.5 Rudder/Elevator/Flap version (REF).

Code 2.5F 

 

 

Download

 

Download

 

Available Pulsar 2.5 Rudder/ Elevator/ Spoiler version (RES).

Code 2.5S

 

 

Download

Download

 

 

Tape down all removable parts before flying! 

GOOD LUCK!

 

You can write us: infof5models@gmail.com