Pulsar 3.6 Pro RES

 

 

F5J Electric Sailplane Rudder/ Elevator/ Spoiler 3,6 m span

Code 2.9S

 

Download

Pulsar 3.6 Pro RES has been designed for popular RES competition.
The three piece wing which is extremely light but very strong, is built with a kevlar/carbon woven cloth D-box leading edge, with carbon capped ribs and a carbon trailing edge.
This design is not afraid of heat and cold, is not afraid of moisture and rain. Wing and control surfaces are not subject to warping, as is usually the case with full balsa model counterparts.
The spoilers and rudder are pre-hinged.

Central panel of the Pro model is made with a cross "V" 2 degrees, which improves the performance models, especially in small thermals.
The fuselage has easily removable canopy for R/C equipment service.
The fuselage can be equipped with a ballast chamber at the request of the customer.

 

Download

 

Specifications:

 

Wing span                     3580 mm

Length                          1540 mm

Wing Area                     80,5 sq. dm

Airfoil                           AG 25 mod.

Weight (less R/C gear)   900 g

 

Control : Rudder, Elevator, Spoilers, Motor.

 

Equipment Installation Diagram.

 

Download

Recommended Equipment:

 

Motor                Outrunner 130 - 150 g.

Controller          Phoenix  ICE Lite 75SB 

Battery pack      3 LiPo 1600 Ah

Propeller           folding 13” x 8”

Spinner             38 mm

Servo                2 x 9 mm elevator and rudder,

                       2 x 9 mm spoilers.

                  (2 x 13 mm flaps for REF version) 

Recommended Control Travel:

 

Elevator       + / - 15 mm

Rudder         Full right/ left

Spoilers        Full up

 

Available Pulsar 3.6 Pro Rudder/Elevator/Flap version REF.

Code 2.9F

Download

 

Download

Available Pulsar 3.6 Pro RES(F) with V-tail.

Download

 

 

Tape down all removable parts before flying! 

GOOD LUCK!


You can write us: infof5models@gmail.com